Welcome to the Jinzhou Swan Welding Consumables Co.,Ltd official website   中文版 ENGLISH
  Product category
    Welding rod
   Low-alloy and high strength steel electrode
   Low-alloy heat-resistance steel electrode
   Cr-Ni stainless steel electrode1
   Surfacing electrode
   Cost iron electrode
   Cr-Ni stainless steel electrode
   Cost iron electrode1
   Low temperature steel electrode
    Welding flux
   JH-SJ101 Agglomerated fluxes
   JH-SJ101G Agglomerated fluxes
   JH-SJ101Q Agglomerated fluxes
   JH-SJ102 Agglomerated fluxes
   JH-SJ105 Agglomerated fluxes
   JH-SJ402 Agglomerated fluxes
   JH-SJ301 Agglomerated fluxes
   JH-SJ403 Agglomerated fluxes for overlaying
   JH-SJ501 Agglomerated fluxes
   JH-SJ501M Agglomerated fluxes
   JH-SJ503 Agglomerated fluxes
   JH-SJ601 Agglomerated fluxes
   JH-SJ181q Agglomerated fluxes
    Welding Wire
   JH-H08A Submerged arc welding wires
   JH-H08MnA Submerged arc welding wires
   JH-H10Mn2 Submerged arc welding wires
   JH-H08E Submerged arc welding wires
   JH-WQ1 Submerged arc welding wires
   Jh-WQ3 Submerged arc welding wires
   JH-WQ4 Submerged arc welding wires
   JH-WWGX2 Submerged arc welding wires
  Products Home>Products
 

【JH-SJ301 Agglomerated fluxes】
 


  Explanation:JH-SJ301 is the agglomerated flux produced by imported technical know-how and equipment of Swiss Qlicon Welding Industry Company, its former product name is OP143.
  JH-SJ101 is a calcium-silicon type neutral flux,alkalinity around 1.0.It is gray and black round grain,with grain size around 2.0~0.28mm.It can be operated with AC and DC,the wire shall be connected to positive pole when applying DC.It has steady arc,nice weld formation,and easy in slag removing,as well with perfect deposit metal welding mechanical properties.It suits various welding conditions, with short slag, and no flow appearances.
  Applications:Accompanying suitable wires (H08A,H08E,H08Mna,etc.), mainly applied in the welding of normal low carbon steel and some low alloy steel (like Q235,20g, X65,etc.) structure and the submerged welding of boiler pressure vessels, ships,pipe lines,etc.Its deposit metal owns perfect impact toughness.It suits the submerged welding with multiple layers, double sides single layer,and multiple wires.

  Chemical Composition of Flux



 Mechanical Properties of Deposit Metal



  Points of Attention:
  1 The  fluxs  to be dried 2 hours in 300℃~350℃.
  2 De-rusting, water and oil cleaning ,as well other impurities removing of the work be done before welding.

 

>>Return    ↑Top  

  Copyright:Jinzhou Swan Welding Consumables Co.,Ltd