Welcome to the Jinzhou Swan Welding Consumables Co.,Ltd official website   中文版 ENGLISH
  Product category
    Welding rod
   Low-alloy and high strength steel electrode
   Low-alloy heat-resistance steel electrode
   Cr-Ni stainless steel electrode1
   Surfacing electrode
   Cost iron electrode
   Cr-Ni stainless steel electrode
   Cost iron electrode1
   Low temperature steel electrode
    Welding flux
   JH-SJ101 Agglomerated fluxes
   JH-SJ101G Agglomerated fluxes
   JH-SJ101Q Agglomerated fluxes
   JH-SJ102 Agglomerated fluxes
   JH-SJ105 Agglomerated fluxes
   JH-SJ402 Agglomerated fluxes
   JH-SJ301 Agglomerated fluxes
   JH-SJ403 Agglomerated fluxes for overlaying
   JH-SJ501 Agglomerated fluxes
   JH-SJ501M Agglomerated fluxes
   JH-SJ503 Agglomerated fluxes
   JH-SJ601 Agglomerated fluxes
   JH-SJ181q Agglomerated fluxes
    Welding Wire
   JH-H08A Submerged arc welding wires
   JH-H08MnA Submerged arc welding wires
   JH-H10Mn2 Submerged arc welding wires
   JH-H08E Submerged arc welding wires
   JH-WQ1 Submerged arc welding wires
   Jh-WQ3 Submerged arc welding wires
   JH-WQ4 Submerged arc welding wires
   JH-WWGX2 Submerged arc welding wires
  Products Home>Products
 

【JH-SJ501M Agglomerated fluxes】
 


  Explanation:JH-SJ501 is the agglomerated flux produced b y imported technical know-how and equipment of Swiss Olicon Welding Industry Company,its former product name is OP185.
  JH-SJ501M is the improved type of JH-SJ501, to suit high speed welding.
  JH-SJ501 and JH-SJ501M are aluminum-titanium type acidity agglomerated flux, with alkalinity around 0.5~0.8.They are gray and round grain,with grain size around 2.0~0.58mm,and grain size of JH-SJ501M is around 1.18~0.28mm.It can be operated with AC and DC, the wire shall be connected to positive pole when applying DC.It has steady arc, nice weld formation,and easy in slag removing, as well with perfect deposit metal      welding mechanical properties.
  Applications:Accmpanying suitable wires(like H08A,H08MnA,etc.)to weld low carbon steels and some low alloy steels,like the submerged welding of boilers,pressure vessels,ships,etc.It has perfect deposit metal impact toughness.JH-SJ501M is a specified flux used in  the high speed welding of power plant boiler water wall,its welding speed can come up to 70m/h.

  Chemical Composition of Flux

  Mechanical Properties of Deposit Metal

  Points of Attention:
  1 The  fluxs  to be dried 2 hours in 300℃~350℃.
  2 De-rusting, water and oil cleaning ,as well other impurities removing of the work be done before welding.
This product was approved by China Class Society(CCS),American Bureau of Shipping (ABS),Britain Lloyds’s Register(LR).

 

>>Return    ↑Top  

  Copyright:Jinzhou Swan Welding Consumables Co.,Ltd